Understanding Piedmont Soil | Triangle Gardener Magazine (2024)

North Carolina clay soil is great for pottery and bricks, but many gardeners find it challenging for their plants.

Clay soils often come with drainage problems, lack of air and water movement, and compaction. The Piedmont are of North Carolina also has some areas with sandy soils, deposed by river sediments or ancient ocean deposits. Understanding a bit about our soils forms the basis of what needs to be done to improve them for better gardening results.

Piedmont Soil Structure

Piedmont soils were primarily created from the mountain and rock erosion resulting in predominantly clay soils. Such soils tend to be shallow and aren’t naturally rich in mineral deposits. In addition, our high heat and rainfall cause leaching of minerals and nutrients and speed breakdown of organic matter which means we need regular additions of both. Another characteristic of our soils is that they tend to have a low or acid pH, while most plants prefer a neutral pH. The exact composition of soils varies throughout the area, and even in different regions of your yard, so a soil test is always recommended to understand your own specific pH and fertility levels.

Clay has many attributes that can make it difficult to work with. It tends to compact, can hold too much water, and gets slippery when wet. But it has redeeming qualities too, one of which is that it does a good job of holding plant nutrients when they are present. Sandy soils, though, are not able to retain nutrients well and require “spoon-feeding” to maintain fertility.

Most likely, you have soil that is a mixture of the three basic types of particles: Sand, Silt, and Clay. Sand is the largest; it is gritty, loose, and drains quickly. Sand is roughly spherical with angular edges. Clay is the smallest; the particles are so small that you cannot see individual particles with your naked eye. Clay particles have a flat, plate-like shape and thus adhere together quite tightly which causes it to drain slowly, and gives it its slippery nature. Silt particles are in-between in size as they are weathered sand with a more or less spherical shape.

The relative amounts of the different particle types making up your soil are called its texture. The texture of soil affects its physical characteristics and behavior. A soil with mostly large particles (sand) has large pore spaces and will drain quickly, whereas a soil with mostly clay particles has very small pores and won’t drain well.

Soil Types

Descriptive names are used to classify soils of varying components into textural classes such as sandy loam or silty clay. The specific mix of particle types determines the textural class, for example, a soil that is 10 percent sand, 35 percent silt, and 55 percent clay is in the clay textural class and will have characteristics of clay soil. The “perfect” soil type, called loam, is a balanced mix of the various particle types. Unfortunately, it is not characteristic of our area, while soils with clay properties are widespread.

Clay soils can easily become compacted, especially if exposed to heavy equipment or lots of foot traffic. In compacted soils, the air and water are pushed out and it is compressed. Compacted soils have less infiltration, greater runoff, a higher risk of erosion, and more restricted root growth than soils without compaction.

Short of removing and replacing your soil, you can’t really do much about its texture. However, there is another characteristic – structure that holds much potential for improvement.

Structure refers to how individual soil particles are grouped into larger pieces called aggregates. Poor structure in compacted clay leads to slow water movement and low oxygen which can starve plant roots and microorganisms of oxygen leading to root disease and changes in soil chemistry. In sandy soils, organic matter can play a vital role in retaining moisture and nutrients.

Good soil structure includes air channels and pores, which allow rapid movement of both air and water through the soil. The missing critical component to help in the formation of a good structure is the presence of organic matter (OM). You can add OM to improve your clay and make for happier plants.

Cynthia Sollod has always loved plants, hence a B.S. in botany and a Ph.D. in Plant Pathology. She has volunteered with the Wake County Master Gardener program since 1995. She enjoys painting, illustrating plants, and writing about gardening.

Understanding Piedmont Soil | Triangle Gardener Magazine (2024)

FAQs

What is the Piedmont soil classification? ›

The Piedmont series consists of moderately deep, well drained, very slowly permeable soils formed in material weathered from clayey and silty shale of Permian age.

Is cecil soil good to build on? ›

Like other well-drained Ultisols, it is ideal for urban development; however, in common with other kaolinite-dominated clays, it has little ability to recover from soil compaction.

Why is Piedmont soil red? ›

The red and yellow colors result from the accumulation of iron oxide (rust), which is highly insoluble in water.

What type of soil is best for growing plants? ›

The ideal mixture for plant growth is called a loam and has roughly 40% sand, 40% silt and 20% clay. Another important element of soil is its structure, or how the particles are held together - how they clump together into crumbs or clods.

What soils are bad to build on? ›

Clay is typically not a good soil on which to place a building foundation. It may even be the worst soil type to build on. In practice, it is seldom that simple–construction sites contain varying mixes of soil types, as well as many other factors that make the ground better or worse to build on.

What is the most stable soil to build on? ›

Loam is the best soil type for construction due to its ideal combination of silt, sand, and clay. It combines the best of all their qualities into the ideal balance for supporting a foundation. Loam generally does not shift, expand, or shrink drastically and handles the presence of water very well.

What is the best soil type to build a house on? ›

Loam, a combination of clay, sand, and silt, is often regarded as one of the best soils for building. It absorbs water and dries out at a steady rate. There's much less expansion and contraction with loam than with clay. This means less pressure is exerted on the foundation.

What state has the most clay? ›

Georgia is by far the leading clay-producing state in America and is recognized as a world leader in the mining, production, processing, and application of kaolin products.

What does "grey soil" mean? ›

Gleyed/grey/green. These soils are associated with very poor drainage or waterlogging. The lack of air in these soils provides conditions for iron and manganese to form compounds that give these soils their colour. waterlogging or drainage problems.

Is Piedmont soil acidic? ›

In addition, our high heat and rainfall cause leaching of minerals and nutrients and speed breakdown of organic matter which means we need regular additions of both. Another characteristic of our soils is that they tend to have a low or acid pH, while most plants prefer a neutral pH.

Can you use topsoil instead of potting soil? ›

Topsoil is best used for outdoor projects where the root systems have space to expand rather than being confined to a container. Using topsoil for plants in pots will mean that your plant won't get the nutrients it needs to grow and will more than likely die sooner than expected.

What is the best soil in the United States? ›

Mollisols are the best soils for farming because they contain large quantities of organic matter. Mollisols found in the Midwestern U.S. are the best for agriculture due to the grasslands that were present thousands of years ago.

What does too much clay do to soil? ›

Garden soil, or loam soil, ideally consists of a mix of clay, sand, and silt. Too much clay will cause water to pool, drowning plants, worms, and beneficial micro-organisms. Too little clay can make the water run right through your soil, not allowing your plants to absorb nutrients.

What soil is in the Piedmont zone? ›

Answer: Red and Yellow soil is found in the piedmont zone/foothill of Western Ghats.

What classification of soil is typically found in the Piedmont triad? ›

Cecil soil consists of very deep, well-drained, moderately permeable, residual soils in uplands areas of the Piedmont. These soils are observed overlying igneous (solidified from lava or magma) and metamorphic (rock that has undergone transformation by heat and pressure) rocks.

What are the soil types in Piedmont plateau? ›

The soils of the Piedmont region vary, but most are classified as ultisols, one of the 12 soil categories differentiated by chemical composition, physical characteristics, and the effects of the local environment. These are highly weathered soils, meaning their particles are very fine and claylike.

What type of land is in the Piedmont region? ›

The plateau of the Piedmont region has been formed largely on the edges of steeply upturned and altered rocks. Topographically, the Piedmont is made up of low hills and narrow valleys.

Top Articles
Latest Posts
Article information

Author: Gov. Deandrea McKenzie

Last Updated:

Views: 6285

Rating: 4.6 / 5 (46 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Gov. Deandrea McKenzie

Birthday: 2001-01-17

Address: Suite 769 2454 Marsha Coves, Debbieton, MS 95002

Phone: +813077629322

Job: Real-Estate Executive

Hobby: Archery, Metal detecting, Kitesurfing, Genealogy, Kitesurfing, Calligraphy, Roller skating

Introduction: My name is Gov. Deandrea McKenzie, I am a spotless, clean, glamorous, sparkling, adventurous, nice, brainy person who loves writing and wants to share my knowledge and understanding with you.